Màng lọc công nghiệp RO - FILMTECH Là công nghệ độc quyền của tập đoàn DOW
Cung cấp hàng chính hãng, giá tốt nhất, lắp đặt ttaanj nơi Màng lọc RO công nghiệp - FILMTEC. Mẫu: TA-FILMTEC
Trung tâm lọc nước pure water Flimtech chuyên cung cấp hệ thống lọc nước tinh khiết công nghiệp, dây chuyền lọc nước đóng bình tự động. Phân phối màng lọc công nghệ RO từ Mỹ đạt tiêu chuẩn nước uống trực tiếp. loại bỏ vi khuẩn, loại bỏ tạp chất độc hại, điều này còn giúp bảo vệ các thiết bị, màng lọc cho các thiết bị khác.
Bảng giá bán màng lọc RO Flimtech và màng lọc RO Vontron
| STT | Tên sản phẩm | Kích thước | Chủng loại | Giá bán VND |
| 1 | LCHR - 4040 Filmtec-Dow USA | Φ 4” x 40” | Áp thấp 150psi | 4.500.000 |
| 2 | BW30-4040 Filmtec-Dow USA | Φ 4” x 40” | Áp thấp 150psi | 4.200.000 |
| 3 | BW30-4040 Filmtec-Dow USA | Φ 4” x 40” | Áp cao 250psi | 4.500.000 |
| 4 | LE–4040 Filmtec - Dow | Φ 4” x 40” | Áp thấp 150psi | 4.200.000 |
| 5 | BW30-400 Filmtec-Dow USA | Φ 8” x 40” | Áp cao 225psi | 13.000.000 |
| 6 | BW30 - 365 Filmtec - Dow | Φ 8” x 40” | Áp cao 225psi | 13.000.000 |
| 7 | LE – 400 Filmtec-Dow USA | Φ 8” x 40” | Áp thấp 150psi | 13.000.000 |
| 8 | HR LE440-i Filmtec-Dow USA | Φ 8” x 40” | Áp thấp 150psi | 15.500.000 |
| 9 | HR LE440-i Filmtec-Dow USA | Φ 8” x 40” | Áp thấp 150psi | 15.500.000 |
| 10 | ULP 21 – 4021 VON TRON | Φ 4” x 21” | 225 PSI (15,5at) | 2.300.000 |
| 11 | ULP 31 – 4021 VON TRON | Φ 4” x 21” | 150 PSI (10,5at) | 2.400.000 |
| 12 | ULP 21 – 4040 VON TRON | Φ 4” x 40” | 150 PSI (10,5at) | 2.400.000 |
| 13 | ULP 31 – 4040 VON TRON | Φ 4” x 40” | 150 PSI (10,5at) | 2.400.000 |
| 14 | LP21- 4040 VONTRON | Φ 8” x 40” | 225 PSI (15,5at) | 2.200.000 |
| 15 | LP31- 4040 VONTRON | Φ 8” x 40” | 225 PSI (15,5at) | 2.400.000 |
| 16 | VONTRON ULP 21 - 8040 ULP 22 - 8040 ULP 32 - 8040 | Φ 8” x 40” | 150 PSI (10,5at) | 9.300.000 |
| 17 | VONTRON LP 21 - 8040 LP 22 - 8040 LP 32 - 8040 | Φ 8” x 40” | 225 PSI (15,5at) | 9.300.000 |
| 18 | TW30-1812-50 Filmtec-Dow USA | Máy 10 lít | Máy nhỏ | 230.000 |
| 19 | TW30-1812-100 Filmtec-Dow USA | Máy 30 lít | Máy nhỏ | 530.000 |
(Bảng giá trên đã chưa bao gồm thuế GTGT 10%)
THÔNG SỐ KỸ THUẬT MÀNG LỌC RO
| MODEL | BW30-4040 ULP 31 – 4021 VON TRON ULP 21 – 4021 VON TRON | LE-4040 ULP 31 – 4040 VON TRON ULP 21 – 4040 VON TRON | BW30 400i(8040) LP31- 4040 VONTRON LP21- 4040 VONTRON | BW30-365(8040) VONTRON LP 21 - 8040 LP 22 - 8040 LP 32 - 8040 |
| Công suất màng (GPD) | 2200 | 2500 | 7600 | 7600 |
| Loại màng RO | 4.0 x 40 TFC | 4.0 x 40 TFC | 8.0 x 40 TFC | 8.0 x 40 TFC |
| Áp suất làm việc (PSI) | Max. 250 | Max. 150 | Max. 250 | Max. 250 |
| Vỏ bảo vệ | Sợi thuỷ tinh | Sợi thuỷ tinh | Sợi thuỷ tinh | Sợi thuỷ tinh |
| Khả năng khử khoáng (%) | 99.5% | 99.0% | 99.5% | 99.5% |
| Diện tích tác dụng (m2) | 7.6 | 7.6 | 37 | 34 |
| Khoảng pH cho phép | 2.0 – 11.0 | 2.0 – 11.0 | 2.0 – 11.0 | 2.0 – 11.0 |
| Độ đục cho phép tối đa (NTU | 1.0 | 1.0 | 1.0 | 1.0 |
| Chlorine tối đa (mg/l) | 0.1 | 0.1 | 0.1 | 0.1 |
| Chiều dài | 40 (1016) | 40 (1016) | 40 (1016) | 40 (1016) |
| Chiều rộng | 3.9 (99) | 3.9 (99) | 8.0 (203) | 8.0 (203) |
| Khối lượng tịnh (kg) | 5.5 | 5.5 | 14.5 | 14.5 |
ermeate Flow Rate
gpd (m3/d) Stabilized Salt Rejection
(%) Minimum Salt Rejection
(%)
2500 (9.5) 99.2 99.1
Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 77°F (25°C), 15% recovery, pH 8, and applied pressure 225 psig for LC HR and 125 psig for LC LE
Permeate flows for individual elements may vary +/-15%.
For the purpose of improvement, specifications may be updated periodically.
DOW FILMTEC BW30-4040
DOW FILMTEC™ brackish water reverse osmosis membrane elements offer consistent, exceptional system performance in light industrial applications.
DOW FILMTEC BW30-4040 is an industry standard for reliable operation and production of high quality water.
Features the thickest feed spacer (34 mil) available in the industry today to lessen the impact of fouling.
May be cleaned over a wide pH range (pH 1-13) for the most effective cleaning.
Elements with a hard shell exterior are recommended for systems with multiple-element housings containing three or more membranes, as they are designed to withstand higher pressure drops.
DOW FILMTEC BW30-365
For years, the DOW™ FILMTEC™ BW30-365 has been the element of choice for system designers, OEMs, and system operators requiring consistently high performance and maximum element life when treating difficult feed waters. This element offers proven performance, high rejection, and exceptional robustness and durability across a wide range of feed conditions where unit price is a key driver.
Features the thickest feed spacer (34 mil) available in the industry today to lessen the impact of fouling.
May be cleaned over a wide pH range (pH 1 - 13) for the most effective cleaning.
The DOW FILMTEC BW30-365 element is best suited for systems operating on challenging feed streams, where reliable pretreatment is not an option, or where maximum cleanability delivers value.
Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77°F (25°C), pH 8 and 15% recovery.
Permeate flow rates for individual elements may vary, but will be no more than 15% below the value shown.
Sales specifications may vary as design revisions take place.
Active area guaranteed +/-3%. Active area as stated by Dow is not comparable to nominal membrane area often stated by some manufacturers. Measurement method described in Form No. 609-00434 (168KB PDF).
gpd (m3/d) Stabilized Salt Rejection
(%) Minimum Salt Rejection
(%)
2500 (9.5) 99.2 99.1
Permeate flow and salt rejection based on the following test conditions: 2000 ppm NaCl, 77°F (25°C), 15% recovery, pH 8, and applied pressure 225 psig for LC HR and 125 psig for LC LE
Permeate flows for individual elements may vary +/-15%.
For the purpose of improvement, specifications may be updated periodically.
DOW FILMTEC BW30-4040
DOW FILMTEC™ brackish water reverse osmosis membrane elements offer consistent, exceptional system performance in light industrial applications.
DOW FILMTEC BW30-4040 is an industry standard for reliable operation and production of high quality water.
Features the thickest feed spacer (34 mil) available in the industry today to lessen the impact of fouling.
May be cleaned over a wide pH range (pH 1-13) for the most effective cleaning.
Elements with a hard shell exterior are recommended for systems with multiple-element housings containing three or more membranes, as they are designed to withstand higher pressure drops.
DOW FILMTEC BW30-365
For years, the DOW™ FILMTEC™ BW30-365 has been the element of choice for system designers, OEMs, and system operators requiring consistently high performance and maximum element life when treating difficult feed waters. This element offers proven performance, high rejection, and exceptional robustness and durability across a wide range of feed conditions where unit price is a key driver.
Features the thickest feed spacer (34 mil) available in the industry today to lessen the impact of fouling.
May be cleaned over a wide pH range (pH 1 - 13) for the most effective cleaning.
The DOW FILMTEC BW30-365 element is best suited for systems operating on challenging feed streams, where reliable pretreatment is not an option, or where maximum cleanability delivers value.
| Nominal Active Surface Area ft2 (m2) | Permeate Flow Rate gpd (m3/d) | Stabilized Salt Rejection (%) | Minimum Salt Rejection (%) |
| 365 (34) | 9,500 (36) | 99.5 | 99.0 |
Permeate flow rate and salt rejection based on the following test conditions: 2000 ppm NaCl, 225 psig (15.5 bar), 77°F (25°C), pH 8 and 15% recovery.
Permeate flow rates for individual elements may vary, but will be no more than 15% below the value shown.
Sales specifications may vary as design revisions take place.
Active area guaranteed +/-3%. Active area as stated by Dow is not comparable to nominal membrane area often stated by some manufacturers. Measurement method described in Form No. 609-00434 (168KB PDF).
Sản phẩm / Màng lọc RO, lõi lọc các loại
Màng lọc RO FILMTEC 4040, 4021, 4080, 8080
Sản phẩm khác:
- Hóa chất rửa màng RO
- Dịch vụ cho thuê, rửa màng RO
- Màng lọc RO FILMTEC - USA
- Màng lọc RO GE - USA
- Màng lọc Vontron - CN USA
- Lõi lọc khuẩn 0.2 micron
- Đèn diệt khuẩn UV
- Máy lọc nước tinh khiết RO.
- Dàn lọc nước đóng chai
- Tư vấn công nghệ lọc nước
- Hướng dẫn làm bể lọc nước giếng khoan Bách Khoa
Màng lọc ro filmtech thẩm thấu ngược R.O là công nghệ lọc hiện đại nhất, sử dụng trong công nghệ lọc nước tinh khiết, lọc nước siêu tinh khiết, lọc nước biển thành nước ngọt. được ứng dụng rộng rãi trong công nghệ lọc nước tinh khiết đóng chai, nước dùng cho Ytế, dùng cho công nghệ chế biến thực phẩm và điện tử...
Chuyên nhận rửa và phục hồi màng RO các loại đảm bảo đạt lưu lượng 80 - 100%
Click để xem chi tiết: Chuyên rửa phục hồi các loại màng RO
BẢNG BÁO GIÁ MÀNG RO FILMTEC - MADE IN USA
DOW CHEMICAL - SẢN XUẤT TẠI HOA KỲ- Màng lọc Ro Filmtec được sản xuất 100% tại Hoa Kỳ
Màng lọc RO FILMTEC 4040, 4021, 4080, 8080
Sản phẩm khác:
- Hóa chất rửa màng RO
- Dịch vụ cho thuê, rửa màng RO
- Màng lọc RO FILMTEC - USA
- Màng lọc RO GE - USA
- Màng lọc Vontron - CN USA
- Lõi lọc khuẩn 0.2 micron
- Đèn diệt khuẩn UV
- Máy lọc nước tinh khiết RO.
- Dàn lọc nước đóng chai
- Tư vấn công nghệ lọc nước
- Hướng dẫn làm bể lọc nước giếng khoan Bách Khoa
Màng lọc ro filmtech thẩm thấu ngược R.O là công nghệ lọc hiện đại nhất, sử dụng trong công nghệ lọc nước tinh khiết, lọc nước siêu tinh khiết, lọc nước biển thành nước ngọt. được ứng dụng rộng rãi trong công nghệ lọc nước tinh khiết đóng chai, nước dùng cho Ytế, dùng cho công nghệ chế biến thực phẩm và điện tử...
Chuyên nhận rửa và phục hồi màng RO các loại đảm bảo đạt lưu lượng 80 - 100%
Click để xem chi tiết: Chuyên rửa phục hồi các loại màng RO
BẢNG BÁO GIÁ MÀNG RO FILMTEC - MADE IN USA
DOW CHEMICAL - SẢN XUẤT TẠI HOA KỲ- Màng lọc Ro Filmtec được sản xuất 100% tại Hoa Kỳ

